Paxton Access cardlock function card pack
- A lost card can be voided with a shadow card
- One shadow card is provided per user
- All users are valid after enrolment
- Choice of pack sizes
- Use with Compact and Switch2
- Supplied in convenient card wallets
- For use with Paxton cardlock Compact and Switch2 systems
OperationUser cards are supplied in wallets. Each card is packaged with a corresponding paper shadow card. Once installation of the system is complete all user cards are valid and ready to be issued. To issue a user card, remove it from the wallet and write the name of the user on its corresponding shadow card. The user may now use their card to gain access. This process is repeated for all users. If a card needs to be invalidated, the corresponding shadow card is removed from the wallet and swiped through any relevant readers on site. This invalidates the card. Magstripe cards are expected to last for 10,000 operations when used in normal conditions.
About
For use with CARDLOCK compact and Switch2 systems. The Function card pack unlocks the more advanced features of these systems. Requires order card from starter pack if purchasing separately.
Paxton Installation
The Paxton Cardlock Function card pack must be ordered with the Starter pack or by using the order card from your Starter pack. It is ready to use with your system.
Zone cards: There are three zone cards; green, amber and red. The point of zoning is to restrict the access privileges of groups of users dependant on the colour of their card. Swiping any of the three Zone cards to a reader will turn off the LED of that colour. Users with that colour user card will not be granted access. If the same Zone card is swiped again the LED will turn back on. This means that users with that colour card will be granted access.
Time zones: This function allows a coloured zone be activated/deactivated by a time clock.
Remote release: This card returns a system from the time zones mode back to its default state, where the exit button contacts may be used for a press to exit button.
Card plus PIN: This allows CARDLOCK and TOUCHLOCK systems to be connected together to give card plus code access control.
Bar all users: A freshly installed CARDLOCK system will recognise and admit all users cards that have been ordered for it. In some cases it may be more appropriate to start with all cards invalid so they may be validated individually.
Relay toggle card: For use with Switch2 only. This changes the operation of the relay from momentary to toggling (or latching). If a valid card is swiped the relay will switch. The relay will remain switched until either the same or any other valid card is swiped.
What has been said about us in our testimonials.
0845 230 02 01
