CCTV Test Equipment

VideoStik is a low-cost, battery-operated video sensing device will detect the presence of standard 1v p to p video by simply probing the BNC terminated cable. There are no switches or buttons - VideoStik is powered up only when a valid signal is applied. ...

This meter provides a direct reading in volts of peak white and sync levels of a CCTV signal on a 4 digit LCD display. An input impedance switch provides slection between terminated (75) and unterminated (high impedance) ...

This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75O) and unterminated (high impedance) ...

The Cable Length Meter CLM1 will allow the accurate measurement of severed or open/short-circuit CCTV coaxial cable. For use with RG59 (75) and RG58 (50) or equivalent coaxial cable, this meter provides a direct readout in metres of the length of an unterminated run of coaxial cable with a resolution of 2-3 ...

Ideal for CCTV installation, on-site demonstration and testing Light weight & compact size Resolution 320x234 pixels NTSC/PAL auto recognition Two video BNC input and one audio jack input Test pattern generator (colorbars/crosshatch/RGB/Dot) ...