•    Total       Value   
  • Checkout
Call Us : 0845 230 02 01
Categories
Testimonials
Community



Procedures

1 - Enter Master Code
2 - Enter the * key. 3 long beeps will be heard, and the green LED will flash, indicating that the keypad is in Program Mode. Both relays are now deacivated.
3 - To program a desired setting, enter the corresponding Access Key Number. The LED's will indicate the Access Key chosen.
4 - Enter they # key.
5 - Enter the desired value (4 digits) of the function selected.
6 - Enter the # key.
7 - Enter the desired value again.
8 - Enter the # key. If the two entries of the desired value are identical, 2 long beeps will be heard, the red and yellow LED's will go off. The green LED will keep flashing. If the two entries are mismatched, or if you have entered a wrong sequence of keys, a 2-second short beep will be heard, and the keypad will stay in the Program Mode.
9 - Enter the * key and then the # key to end programming. 2 long beeps will be heard, the LED's will return to their original states.


Programmable Functions

Access Key Function Default Value Allowed Values
0 Master Code 1234 0000-9999
1 User Code 1 1111 0000-9999 except Master Code
2 User Code 2 2222 0000-9999 except Master Code & User Code 1
3 User Code 3 3333 0000-9999 except Master Code & User Code 1,2
4 Key Relay Time (0.01 - 99.99 sec) 0500 0000 Latch Mode
0500 5.00 Sec
9999 99.99 Sec
5 Aux Relay Time (0.01 - 99.99 sec) 0050 0000 Latch Mode
0500 5.00 Sec
9999 99.99 Sec
6 System Mode 0110 (X=0 or 1) 0110 (Internal LED Mode, User Codes 1, 2 enabled, User Codes 3 disabled).
0xxx Internal LED Mode
1xxx External LED Mode
x0xx Disable User Code 1
xx0x Disable User Code 2
xxx0 Disable User code 3
x1xx Enable User Code 1
xx1x Enable User Code 2
xxx1 Enable User Code 3
7 LED Trigger Polarity 0000 0000 Negative level trigger
0001 Positive Lever Trigger
8 Panic Key Enable 0000 0000 Disable
0001 Enable
9 Security Level 0001 0000 No safety level set
0001 After 4 successive wrong codes, stay idle 30 sec.
0002 After 4 successive wrong codes, stay idle 60 sec.
0003 After 4 successive wrong codes, stay idle until Master Code is entered.
0004 After 4 successive wrong codes, Aux relay closes.


Access Key Yellow LED Red LED
- OFF OFF
1 OFF 1 flash
2 OFF 2 flashes
3 OFF 3 flashes
4 ON 4 flashes
5 ON OFF
6 ON 1 flash
7 ON 2 flashes
8 ON 3 flashes
9 ON 4 flashes
0 ON ON
Note :- Green LED always flash


Meet the LocksOnline Team
If you need technical help our locksmith Darrel has over 25 years experience
If you need any ironmongery or handles drop Eve an email
Lesley deals with all accounts and sales
Deals with sales on our sites contact Ann today
Jacks Deals with the website, any problems let him know