| Installation Instructions
1 -
Position the Pacri bolts near the lower
inside corners of the door, approx. 300mm
above the floor (for ease of use) and approx.
20mm in from the edge to allow for the projection
of the bolt.
2-
Clamp the bolts into position, ensuring
they are level and mark the three holes
for the key and the two fixing bolts. Drill
sizes : key hole 11mm, bolt holes 8mm. Taking
care not to damage the Pacri unit, Drill
the holes and then insert the nuts and bolts.
3 -
Hold the escutcheon against the outside
of the door. Push the key through it and
into the lock. Ensure they key can move
freely, and mark the two small holes for
the rivets. Drill size : 3.5mm. Taking care
not to damage the Pacri unit, drill the
holes for the rivets and fix the escutcheon
with a hand rivet gun.
4 -
With the door firmly closed, operate the
locks to mark the bolt positions on the
frame. Drill 13mm holes to recieve the bolts.
Job Done.
|
