1 -
Position the Pacri bolts near the lower inside corners of the door, approx. 300mm above the floor (for ease of use) and approx. 20mm in from the edge to allow for the projection of the bolt.

2-
Clamp the bolts into position, ensuring they are level and mark the three holes for the key and the two fixing bolts. Drill sizes : key hole 11mm, bolt holes 8mm. Taking care not to damage the Pacri unit, Drill the holes and then insert the nuts and bolts.

3 -
Hold the escutcheon against the outside of the door. Push the key through it and into the lock. Ensure they key can move freely, and mark the two small holes for the rivets. Drill size : 3.5mm. Taking care not to damage the Pacri unit, drill the holes for the rivets and fix the escutcheon with a hand rivet gun.

4 -
With the door firmly closed, operate the locks to mark the bolt positions on the frame. Drill 13mm holes to recieve the bolts.

Job Done.