APT Single Residence Video Intercom System

The APT SingleWay is a door-phone entry system designed for a single residence.  Featuring a high-quality colour video feed on a crisp 7" TFT display, this allows you to physically see who is at the door as well as communicate by voice. 

This feature-rich solution also allows you to control multiple locks from one station.  So if you have a gated residence you can fit the station at the gate, utilise the additional 'gate' control relay to unlock the gates, then use the main lock relay to unlock the front door.  You can also have up to four stations, so you may wish to control the gate with one station, and then your front door with another; and perhaps one for a side entrance or back door too should you need to do so. 

The standard single-button door station measures in at 85mm (W) x 165mm (H) x 53mm (D), whilst the keypad version measures a slightly larger 87mm (W) x 200mm (H) x 53mm (D).

You can also have up to four monitors to fit within the building.  One of these will be assigned as a 'master' device.  This device will sound and display the live video feed as soon as the call button is pressed on the intercom station.  Any additional 'slave' devices will also sound to alert you of a visitor; and will then display the video feed if you were to pick up the call on that device.  The overall size of the monitors is 215mm (W) x 152mm (H) x 18mm (D) for the standard version, and the recording monitor comes in slightly bigger at 183mm (W) x 185mm (H) x 20mm (D).

The system its self can handle up to 5 devices in total.  This means if you only have one door station, you can have four receiver devices.  And if you were to utilise multiple door stations, you would need to deduct the total out of the available devices.  So 1 door station + 4 receiver devices or 2 door stations with three receiver devices and so on.

A suitable 24v DC power supply is provided, but please do bear in mind this is only intended to power the intercom system devices (up to 5 possible) and not any locks or additional access devices used in your system.

With regards to running cable or indeed retrofitting an existing installation; the entire system is wired using basic 2-core wiring, and CAT5 cable is advisable.  If you have an old system using standard 2-wire alarm cable or similar, this would suffice but the possible range would be much more restricted than the rated 150m using CAT5.

What's in the box?

1 x Single-Button Door Station (IP55 Rated)

1 x Wall-Mount Call Monitor - 7" TFT Screen (Fits Single Gang Back Box)

1 x System Power Supply (Powers Devices Only)

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.