Contactless Door Access Panel

This completely hands-free access control switch is used to allow visitors to operate doors with electric locks without having to physically press a button, making it a much more safe and hygienic solution than traditional exit buttons.  

Whilst these are most commonly used as exit buttons, they can also be used as entry buttons, as long as you ensure there is a means to disable the system outside of office hours.  This can be achieved very simply by using an isolating switch at reception, or to remove this responsibility and potential for human error, you could introduce a digital timeclock into the system so that the panel will only be active during the specified times of the timeclock. 

Featuring LED illumination and an internal buzzer, the panel offers both visual and audible feedback to the user when activating, with the lights changing from red to green upon successful activation.   The buzzer can be disabled should you wish to remove this functionality; which is particularly handy for high-traffic doors where the audible feedback could become a nuisance for those in constant close proximity. 

To set up the panel and terminate your wiring, the front plate of the panel slides out completely once you remove the bottom end-stop, allowing for very convenient handling of the panel during this process, and also grants access to the buzzer switch to enable/disable the audible feedback, as well as to the variable resistors on the board which allow for adjustment of the relay trigger timing and read-range of the infra-red sensor.