LocksOnline High-Impact Weatherproof Green Dome Exit Button

With added weatherproofing, this green dome exit button it suitable for exposed conditions, achieving IP66 rating, protecting from water ingress through the button itself.  This makes them a candidate for use on gates or other wet environments, where this IP rating really becomes critical. 

Featuring a highly visible 35mm green dome push button as well as green printed "PRESS TO EXIT" instructions on the stainless steel front plate, these exit buttons are cleverly designed on a ball-joint type mount, allowing for the button to operate correctly from various angles of impact, and does not require a perfect linear motion to trigger.   This is also designed to withstand high impact, which has in the past been a common cause of exit buttons needing to be replaced frequently, where visitors 'smack' the button to let themselves out. 

These can be surface-mounted as they are supplied with the green surface mount box shown in the photos, however you must bear in mind that the IP rating applies to the button itself and not the overally fitting (as this cannot be IP rated).  So it is important for you or your installer to ensure that the back-box is properly sealed to protect your wiring also.   Of course you can disregard the supplied back-box completely and opt for a flush-fitting into a standard single-gang pattress box if you prefer.  Again this would need to be weather-proofed should you need it to be.