ACTSmart 1080e Pin Proximity Reader (Legacy)

Product Overview

The ACTsmart 1080e is extremely attractive in design and is built of rugged polycarbonate with stainless steel keys.

This pin and proximity device is designed to allow simple addition and deletion of users.

It may be totally standalone or connected to other ACTsmart devices in a master-slave mode to enable changes to all doors to be made at one door (max 8 doors).  However if you are looking to build a larger system of up  to 16 doors, then the ACTsmart2 1080e is a better choice for you, as when combined with the ACTsmart2 Network Controller and Software, you have all of the features and benefits detailed below AND the ability to monitor and log events through the PC based software.

Main Features

• 1,000 Users
  
• Access control, interlock, door monitoring and fire alarm interface
  
• Surface or flush mount (mounting directly on to standard electrical back box)
  
• Indoor or outdoor installation (IP67)
  
• Polycarbonate housings, stainless steel keys
  
• Standalone or Master slave operation
  
• ACT HID

• Access Control
  
• Door Monitoring
  
• Intruder and Fire Alarm Interface
  
• Gate Automation

• May be installed in exposed outdoor conditions (IP67)
  
• If the electronic outputs and inputs are to be used, or the master slave feature is required, ensure a DC supply to the unit
  
• As there are up to 1,000 users available on the ACTsmart2 devices, the system administrator should keep good records to enable efficient addition and deletion of users
  
• In the event of master slave operation, ensure there is at least one ACTsmart2 1080 device when proximity is being used