ACTSmart 1070e Proximity Reader (Legacy)

The ACTsmart 1070e is both a reader and controller. It is built of rugged polycarbonate and is extremely attractive in design. This proximity only device can be used either indoors or outdoors (IP67) and can be surface or flush mounted. It may be totally standalone or connected to other ACTsmart devices in a master slave mode, which enables changes to all doors to be made at one door (max 8 doors). This is an older variation from the ACTsmart range, with the newer ACTsmart2 1070e being an updated version of this, and also offering the ability to be networked into a 16 door configuration.

Main Features

• 1,000 Users
  
• Access control, interlock, door monitoring and fire alarm interface
  
• Surface or flush mount (mounting directly on to standard electrical back box)
  
• Indoor or outdoor installation (IP67)
  
• Polycarbonate housing
  
• Standalone or Master-slave Operation.
  
• Tamper device
  
• HID RFID

• Access Control
  
• Door Monitoring
  
• Intruder and Fire Alarm Interface
  
• Gate Automation

• May be installed in exposed outdoor conditions (IP67)
  
• If the electronic outputs and inputs are to be used, or master slave feature is required, ensure a DC supply to the unit
  
• As there are up to 1,000 users available on the ACTsmart2 devices, the system administrator should keep good records to enable efficient addition and deletion of users
  
• When using the master slave option ensure that there is at least one ACTsmart2 1080  device when proximity is being used