ACTpro Wireless eLock

The ACTpro eLock is a real time wireless networked electronic locks, that can be installed in minutes on most internal wooden door types. Up to 32 locks can communicate over a wireless network with the ACTpro eLock Hub, which itself is compatible with both the ACTpro 4000 and ACTpro 1500 series door controllers. System configuration and subsequent administration is facilitated via ACTenterprise PC software.

These feature rich locks are available in a range of options including no-key override, key override,  and key override with privacy latch. Please note that the cylinders and latches are not supplied with the handle, and need to be purchased separately.

Lock Features

• Up to 200,000 lock activations or up to 3 years battery life (uses CR123A Lithium Battery)
• Long Range, Secure 128bit AES encrypted wireless communication using 868MHz - locks can be sited up to 100m from the eLock Hub
• USB interface provides an external power source in the event of a total battery failure
• Auto Discovery of locks faciliates easy set up
• Fire Alarm override and toggle modes
• Visual and Audible Alerts
• Suitable for internal wooden doors between 36mm and 60mm thick
• Tamper monitoring
• Door monitoring (when magnetic contact installed)
• Free egress at all times via inside handle
• Electronics and mechanism located on secure side of the door
• Fire rated - BS EN 1634-1:2014 for 30 and 60 minute fire doors
• Brushed/Satin Stainless Steel Finish
• Dimensions: Inside 293mm x 46mm x 30mm, Outside 293mm x 46mm x 25mm
• Handle reader supports 125Khz RFID technology, or MIFARE Classic/DESFire EV1 technology
  

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.