The ACTsmart2 Network Controller is used to connect up to 16 ACTsmart2 Readers/Controllers (up to 16 doors) to a PC running the ACTSmart2 Software. It supports up to 1,000 users in 16 user groups. The event log will store 100,000 events, whilst the controller also features fire override input and tamper monitoring. Suitable for indoor location only, the controller has LED indicators for status and power supply monitoring and operates at 12Volt DC. It connects to a PC via a serial RS232 cable (supplied).
Using the software provided you can create your user database, enter the card or fob numbers as a batch and then assign these to the users. Once the identity details have been saved, you download this information to the readers on the network and you're good to go!
Dimensions wise the unit measures 165mm x 236mm x 55mm and weighs 0.5kg.
The ACTsmart2 Network Controller is supplied with the ACTsmart2 Software that enables you to configure and monitor up to 16 doors. The software supports up to 16 user groups, with up to 4 time zones per used group. It provides a 100,000 event log of activity, and can also produce access control reports for you. The software is password protected, has an upload facility and built in translator, and creates a photo ID for each user.
Minimum PC specification for this software is:
- Windows 7, XP, Vista, 2003
- Pentium 4 (300MHz or better)
- RAM 512MB or better
- CD-ROM Drive
- 1 Serial Port
Compatible readers are the ACTsmart2 1070e, ACTsmart2 1070PM, ACTsmart2 1080e and ACTsmart2 1090e.
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.