BIOSYS Biometric Fingerprint Reader - Standalone & Weigand

This incredibly compact and full-featured device allows you to grant access simply by the use of a fingerprint reader.   This allows for incredibly reliable access control, as well all know how diverse and unique our fingerprints are, and of course prevents any issue of misplaced access cards or fobs.

The reader its self measures just 82mm x 163mm x 26mm and houses an active capacitive sensor with robust steel-coat to provide accurate and consistent readings, and as well as looking incredibly smart, these devices offer both audible 'beep' notices and visual feedback to users, showing blue when in stand-by mode, green when access has been granted, and red when access has been denied due to an attempted access with an unrecognised or revoked fingerprint. 

While most biometric devices will only operate as a stand-alone unit or more commonly as a centrally controlled weigand-based system, these clever devices allow you to do both!  So whether you're looking for a simple stand-alone fingerprint reader that simply allows you to trigger an electronic lock or door release to grant entry to a building, or you'd like to implement biometric access with weigand outputs (26-bit, 30-bit and 44bit) that will communicate with your central controller, this offers you the best of both worlds!

These readers also offer incredibly easy programming.  Using an enrolled "master card", you can enrol up to 500 users' fingerprints, which will each be assigned their own unique "User Card".  These cards would then be registered against the individual enrolled person, and stored by the owner who can then use these cards at a later date to quickly and easily remove users from the system, without any complex or confusing programming involved.  Full details of this can be found in our installation guide, which also has a user enrolment form attached, which can be used to reference user card ID's against each enrolled person's name for ease of maintenance.  Whilst in programming mode the device will light up orange.

The electronic control unit is supplied as standard, and should be fitted inside the building, within 50m of the fingerprint reader. It is important to note that while these have an IP52 ingress-protection rating, it is important to keep the reader sheltered from weather!

Full fitting & wiring instructions can be found in our installation guide along with the simple user enrolment guide, which also has our complimentary user enrolment form attached, to help you keep track of your users and quickly reference authorised persons when later management is required for changing / revoking access.

1 x Master Card & 10 x User Cards are included, as well as all the necessary fixings.  Additional cards can be purchased separately.

LED Visual Colours:

BLUE - Standby
WHITE - Finger Detected
GREEN - Access Granted
RED - Access Denied
ORANGE - Programming Mode
FLASHING RED - Programming Error

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.