ACTpro 200 Two Door Expander

Complete with a 3 Amp built in power supply, the ACTpro 200 is a Two Door Expander for use with the ACTpro range of Door Controllers. The power supply supports two doors, providing each with its own fuse and battery support. There are LEDS on-board providing fault indication, with faults being reported to the controller and PC. The 18swg mild steel cabinet provides ample room for wiring and batteries. Up to 7 ACTpro 200 Expanders can be connected to a controller.

Main Features:

• Controls two doors
• Built in 3 Amp Power Supply Unit
• Provides battery deep-discharge protection
• LED indication for blown fuse
• Mains fault indication
• Unit supports two 7AHr batteries
• Supports entry/exit readers
• Two 1.25Amp Volts regulated power supply outputs
• Alarms monitored via ACTpro Door Controller and ACT Software
• Each door has a 5amp, 30 volt DC lock relay and a 1amp, 24 volt DC alarm relay

• Mains Voltage: 230V AC +10% - 15%
• Frequency of 47 - 63 Hz
• Operating Temperature Range of 0°C - 50°C
• Surface Mouting, Indoor Installation Only
• Mains Fuse: 630mA
• Lock Fuse: 1.25A Quick Blow
• Ripple Voltage: <200mV
• Unit Dimensions: H-355mm x W-370mm x D-85mm
• Unit Weight: 4.8kg