ACTsmart2 1070PM Panel Mount Proximity Reader

This access control proximity reader, designed for panel mounting, will support up to 1,000 users and can be utilised as a standalone, master-slave or networkable reader. Combining both reader and controller into one unit, the ACTsmart2 1070PM Panel Mount Proximity Reader offers options for a single door as a standalone unit, master-slave option for up to 8 doors, or up to 16 doors as a networked unit. It reads ACT 125Khz RFID cards and fobs.

It has programmable inputs and outputs facilitating push to exit, door monitoring/door contact, door alarm (door ajar/door forced), fire alarm override and interlock. It also has a tamper output, and can be utilised with the Smartlock option for added security. Mounting on a standard single gang electrical back box, the front plate of the unit is constructed from polycarbonate, carrying an environmental rating of IP67.

When used as a standalone unit, programming is done with the programming card; in a master-slave arrangement the unit will be programmed via the master keypad; in a networked arrangement programming is completed via the ACTsmart2 Software.

Technical Details:

• Unit operating voltage of 12 - 24 Volts AC or DC
• Relay Contact Rating of 5Amp, 30Volts DC
• Operating temperature range of -10°C to +50°C

As mentioned earlier, this unit can be used as a standalone device, controlling access to one door only. It can be configured in a master-slave set up to manage up to 8 doors, with the master unit being used to programme all readers. If you require a larger system to manage up to 16 doors, then this can be achieved by combining the ACTsmart2 1070PM with the ACTsmart2 Network Controller and ACTsmart Software.