HID multiClass SE RP15 Mullion Proximity Reader

This HID Card Proximity Reader is designed to work with all the modern and past card technologies.

Being multi-class, means that it will work with the older 125Khz and the modern 13.56Mhz  smart cards.

This reader will work with Mifare classic and new, Desfire old and new as well as HID iClass cards. Also, the older generation systems that use the 125Khz frequency will work on this reader. 

The unit comes with a pigtail connection 530 mm long that is easy for you to be able to connect through a wall to the secure side of the door to make the termination.

The back fixing plate is also included. The reader uses the standard Wiegand data protocol between the HID Proximity Reader and the Access Control Controller. 

The reader is constructed from a tough polycarbonate, and features an LED indication strip at the top of the reader. Additionally there is a buzzer within the housing, enabling both audio and visual notifications to be given during the reader operation. As mentioned, the reader is supplied with a fixing plate - this is secured to the wall, and the reader then attached to it using an anti-tamper screw.

The price shown is for the card reader only.

910PTNNEK00000-RP15

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.