Cisa 11823 Series Electric Lock External Gates Garage Doors

If an electric gate lock is what you're after, the Cisa 11823 is the ideal solution for a huge range of gates thanks to its surface-mount application and the mounting plates that come with it. 

With manual key override, you can rest assured that in the event of power failure etc you can still operate your lock and gain access - and this applies from either side of the gate so you can come in and out with your key, no problem at all.  And of course as you'll see in the photo, three keys are supplied as standard and if needed, we can cut more for you - just opt for some extra keys when placing your order! 

Connecting power to these locks is normally done through the door from the hinge side. We show an option of a door loop on the page if needed but we also are able to offer the Cisa Current Transfer Unit, which can be used either on the hinge-side or the opening side of the door if you already have power there from an old strike release or similar.

We also show a power supply. These locks are quite power hungry compared to some locks and require around 2.5 amps to drive the solenoid bolt. So we have listed also a 3 amp power supply if needed.  Please note that if integrating with an intercom or similar, if the system does not offer "dry" volt-free contacts then you'll need to consider using the Handy Relay we offer also. 

Please note these locks are handed, using non-standard handing, so please check the handing chart in the images to ensure correct handing is ordered!