This model is a part of Asec's electric door release range, the Asec A2 Delay electric strike release. This model replaces standard strikes and allows remote access control of a door or gate. This model has been designed to be mortised into the door frame itself, much like standard mechanical strike. It also comes with a mechanical delay pin which keeps the 'released' until the door is openned, at which point the strike then returns and re-activates ready for when the door is closed again. This means if your intercom station or other access control interface is situated a moment away from the door itsself, you are not on a physical time limit to reach the door and enter. The door will be openable until it has been opened, at which point it would then need to be re-triggered to open again.
Another great function of the mechanical delay feature, is that you may wish for a secondary internal door to be triggered at the same time as the external access door, or perhaps trigger the front door at the same time as a yard gate - in which case the visitor is going to require time to get from the first access gate to the second.
This model operates on a fail locked configuration.
Fail Locked: Electric strikes that operate on this type of configuration require power to unlock the door. Therefore in the event of a power failure, the electric strike will remain in the locked position.
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.
|Delayed Action||Unlock till door open then lock|
|Padlock Body Height||105mm|
|Current Consumption||0.65 Amp|
|Supply Voltage||12V AC|
|Holding Force||295kg / 650lbs|
|Access Operation||Fail Locked|
|Hold Open Lever||1|
Please note: The data shown includes that of all products listed on the page, including accessories.
Please double-check with us if you're unsure of any individual product specifications.