The Trimec ES150 Series is a surface mounted electric door release, meaning it is suitable for rim or surface type dead latches. These models once installed can easily be used in conjunction with keypads, key switches and many more. This model operates using 12v DC. The body of the Trimex ES150 Series has been constructed using solid stainless steel. The keeper has also been designed with this material making it very durable and some weather resistant properties (IP56).
Electric strike releases are used to replace older mechanical strike plates found opposing the lock and latch. They allow you to be able to remotely control the open or close state of a door.
The ES150 series is available in either a fail unlocked or failed locked configuration. It is important to choose the correct option of these and the results are very different, an overview of these options can be found below:
Fail Locked: This mode requires power to unlock the door, in the event of power failure it will remain in a locked state, restricting access.
Fail Unlocked: This model requires power to lock the door, in the event of power failure it will remain in an unlocked state, allowing free access.
ES150 Technical Information
Current 243mA @ 12Vdc
Solenoid Solenoids rated for continuous use
Holding Force 680kg Static Strength Rating
Endurance Cycle tested to 1,000,000 operations
Environment Operational temperature range - 20?C to +60?C Weather resistant (IP56)
Body Solid Stainless Steel Construction
Keeper Stainless Steel
* Fail safe/fail secure changeable on site
* Easy installation suitable for steel and wooden door frames
* Stainless steel striker for extra strength and durability
* Available in 12Vdc
* Solenoid rated for continuous use
* IP56 weather resistant
* Australian designed
* Surface or rim mounted applications
* Suitable for use with all access control systems
* Exposed areas
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.
|Padlock Body Height||88mm|
|Current Consumption||0.25 Amp|
|Supply Voltage||12V AC/DC|
|Holding Force||1350kg / 3000lbs|
|Access Operation||Fail Unlocked, Fail Locked|
Please note: The data shown includes that of all products listed on the page, including accessories.
Please double-check with us if you're unsure of any individual product specifications.