Trimec ES200 burglary resistant electric strike is non-monitored. Designed for high security applications and manufactured from solid stainless steel. These strikes have a built in face plate further strengthening the strike to withstand the harshest treatment.
The electric strike should be fully monitored using no less than 3 amp contacts
and have separate door / latch and solenoid monitor switches. The product
should be constructed using solid stainless steel components and provide a
minimum 5 year warranty. Where Power to Lock and Power to Open functions
may be required in the same building, a single electric strike should be interchangeable
from either "power to lock" or "power to open" on site. The electric
strike should not consume current greater than 190 mA at 12 volts and have a
solenoid suitable for continuous use. A maximum projection of 27 mm for the
strike into any door frame is required. A fire rating not less than 4 hours is
required where applicable.
They offer a strong dependable and long-lasting electric strike solution and are suitable for use with any access control system using 90 degree swing doors. These strikes are extremely flexible and can be changed from power-to-lock or power-to-open, mounted on the left or right hand side of the door and come as standard with a continuously rated coil, thus reducing the amount of stock needed to cover each application.
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.
|Padlock Body Height||131mm|
|Current Consumption||0.175 Amp|
|Supply Voltage||12V DC|
|Holding Force||1350kg / 3000lbs|
|Access Operation||Fail Unlocked, Fail Locked|
Please note: The data shown includes that of all products listed on the page, including accessories.
Please double-check with us if you're unsure of any individual product specifications.