Micro-Mag Mini Maglock Kit Face-Fixed for Outward Opening Doors

These compact mini-maglocks have a very compact design, ideal for cabinets and other awkward situations where the installation of a full sized maglock may not be feasible. 

This particular model comes with a basic face-fixed mounting plate, rather than using a configuration of Z / L brackets.  This means they are only suitable for outward opening doors or drawers etc, where you can mount the maglock to a frame or panel which is facing inside surface of the door.

While only very small in its dimensions, these still manage a generous holding force of 680kg - that's 1,500lbs if you're more comfortable using imperial units.  So there's no question about it, the clever, compact design works well, and this somewhat down-sized part of the electromagnetic lock family certainly has not affected the performance and capability offered by these impressive little units.

This maglock kit is designed for outward-opening doors.  As mentioned, there are no Z or L brackets supplied, as this model is designed simply to surface-mount on an adjacent frame or panel to the inside surface of the door.

With regards to power and consumption; these incredible little devices can not only accept both 12v and 24v (DC), but the unique compact design comes up top-marks yet again with its economic power consumption levels.  Consuming just 280mA @ 12v DC (140mA if using 24v); you can power these and most access devices all from a single 1amp power supply. 

This minimal power consumption also means that should you have a power outage, your backup battery will last a good stretch of time, depending on the capacity of the battery you utilise.  Of course, battery backup isn't necessary, but it is definitely strongly advised, as maglocks require power to stay energised, therefore should the power source be lost due to a blackout or electrical maintenance, the door would no longer be secured.  So a backup battery in the power supply is simply a good idea. 

For an idea on battery hours; the 1.2Ah battery would give you a maximum of a 1 hour supply of power if your devices were cumulatively consuming 1.2amps.