Full Length Vertical Electro-Magnetic Door Lock Handle

The LocksOnline BO600 / BO800 is a combined magnetic lock and pull handle, designed to fit vertically at the doors edge and offers phenomenal holding force protection utilising multi-positioned maglocks for far superior strength over and above that of a standard maglock setup. 

The BO Series is the future of access control and be fitted to almost any door. Ideal for both old and new doors alike, this can be installed in as little as 10 minutes.
Suitable for metal, wooden or glass doors. (glass installation requires bracket UBK25 sold seperately)

A superb, fail safe locking solution for the full range of access control devices.

FEATURES
* High resitance to vandalism.
* Surface mounted.
* Quick, easy installation.
* Aesthetically pleasing.
* Suitable for metal, wood or glass doors.
* EM locks supplied with terminal blocks.
* Groove at rear of magnet housing for cable management.
* Pre-drilled mounting holes.
* Magnet housing supplied with cover.

TECHNICAL DETAILS
Holding force - 300kg / 400kg per magnet
Input voltage - 12/24v DC
Consumption - 12vDC = 550mA (per magnet) / 24vDC = 275mA (per magnet)
Dimensions - 2500mm x 105mm x 63.2mm
Operating temperature - {-20c - +70c}


OPTIONAL ITEMS
* UBK25 Glass U-Bracket - This is to allow fitment of the BO600RP to glass doors with thickness between 8-14mm - Sold in 2500mm lengths and is used to fix the BO600RP to a glass door.
* REO 5mm Aluminium Rail Spacer - This is placed underneath the magnet housing (on the frame) in situations where the frame and door do not sit flush. Sold in 2500mm lengths, each spacer will allow the magnet housing to sit 5mm further out from the frame. For gaps greater than 5mm, purchase additional units.  It is not recommended that you exceed 5 packers (25mm).
* ALMA Aluminium Interior Cable Tray - This is an optional extra that is designed to be attached on the secure side of the door, behind the magnet housing allowing cables to be contained within. Sold in 2500mm lengths

IMPORTANT

These locks are a B to B product only and cannot be returned due to their size - please make sure you are comfortable fitting this product and that it is suitable for the application prior to purchase -