SL-167 Electric Solenoid Bolt Lock for Glass-to-Glass Doors

This electric bolt lock is designed specifically for glass-to-glass doors where the frame and the door are both glass.  It works by clamping onto the glass of the door, and the boxed keep then clamps to the surrounding glass in the same way, so that they meet face-to-face when the door is closed. 

These are suitable for glass with a thickness of 9-12mm.  Supplied with the locks are packers which are to be used on the bolting side of the clamp to protect the glass, and some extras you can use to pack out if your glass is on the lower side of the recommended glass thickness. 

In terms of physical design, these are a small and compact style, giving a clean and non-invasive finish to your door, taking up just 114 x 40mm of visible space on your glass door and frame.

With monitoring outputs you are able to wire up to a monitoring station or indicator to show whether or not the lock is being energised (locked state), and in addition to this, there is a small LED indicator light on the side of the lock housing that indicates the current lock state.  So in effect this gives you two means of monitoring. 

These are a fail-safe solution, so in the event of power failure they will release so that free escape can be achieved.  For this reason it is advisable that a power supply with backup battery function is used to allow you to resume normal operation under battery-power in this event.