GU Motor & Cable Kit for Electric Motorised Multipoint Lock (Genuine Version)

If you want to motorise your GU Automatic Slam Lock, or your existing GU electric multipoint lock's motor has been damaged or deteriorated, this is the genuine GU replacement motor, complete with the genuine GU cable required to get things back up and running. Your existing motor will in most cases likely have a stamp or sticker on the side headed "A-Oeffner" followed by some electronic specifications and then the serial number and manufacture batch details.

This is a universal solution to the GU range of automatic locking multipoint locks, so this will retrofit any existing motor on a GU Automatic multipoint lock without a problem. 

These operate on 12v DC and are known to draw approximately 1.8Amps on operation, so it is vital that you utilise a regulated 2amp power supply - we offer professional boxed power supplies to this spec in the order options.

Important Wiring Info

Please note, the typical wiring schematic on these is Black (control wire), Brown (positive +), and Grey (negative -).   However, GU have advised that there are some batches with White (control wire), Brown (positive +) and Green (negative -) cores.   For quick reference, see below: 

If you have Black, Brown, and Grey Cores:

• Black = Control Wire
• Brown = Positive +
• Grey = Negative -

• White = Control Wire
• Brown = Positive +
• Green = Negative -