Mounting Pedestal for Door Entry Devices

Avoid drilling holes into the wall of your building by mounting your door entry panel, keypad or card reader onto these sleek and stylish pedestals, with central cable routing through the pedestal!  

On many buildings, mounting access devices can be tricky due to limited space on walls, or because fitting an access device may be too destructive for the property.   This is where mounting pedestals come in extremely handy, and allows you to avoid drilling into walls to mount your system devices. 

Whether you're looking to mount an entry panel of a door intercom system, or even a keypad or card reader, these pedestals offer plenty of space on the mounting plate for many different devices, with a good blank space of 120mm x 220mm. 

The mounting plate then has a hole in the centre allowing you to route your cables down through the neck of the pedestal, out through the base plate, and into the ground, allowing you to conceal all of your cables neatly and out of harms way.

These pedestals stand 1.1 metres tall - an ideal height for most devices, and feature a cranked neck allowing you to situate the post off to the side of a pathway with the angled post then 'leaning' inwards towards the relevant point of access.