Exidor 400 Touch Bar Deadlocking Latch

Exidor Deadlocking Latch with the ever increasing need for improved security, the Exidor 400 series with electronic latch retraction offers a solution whilst still allowing safe emergency exit from inside the building.

Standard Model is mechnical operation only and does not come with the gear for eletronic retraction

Electronic Latch retraction only available on models specified in the options.

With the ever increasing need for improved security, the Exidor 400 series with electronic latch retraction offers a solution whilst still allowing safe emergency exit from inside the building.

It also allows the integration of the buildings access control systems with the panic exit devices.
A motor concealed within the Touch Bar assembly provides immediate retraction of the bolts to provide access from the secure side of the door via the buildings access control system.

The locking points can also be withdrawn remotely, for example via a key switch from inside the building, whilst still maintaining the instant panic exit release function when the Touch Bar is operated.

The unit operates off a standard 24V DC, 1 amp power supply (not provided). As standard, the bar also incorporates electronic dogging (hold back).
Additionally, an exit alarm can be added to the 400 series with electronic latch retraction or a microswitch facility to allow bar movement to be monitored. Both these options are factory fitted, and must be specified when ordering.

• 660mm bars are suitable for door widths 692mm to 900mm.


• 840mm bars are suitable for door widths 872mm to 1200mm.



• Suitable for wood or steel doors.


• CE marked for safety.


• Certified to EN1125: 1997 + A1: 2007.


• Non handed.


• Deadlocking latch bolt.


• Certifire approved for timber and steel doors.


• Patented lip to prevent intentional or accidental jamming.


• Two standard sizes.