ASEC 70 PZ uPVC Lever Handles for Ferco Locks - 270mm (240mm fixings)

Ferco used the 70mm PZ measurement for many years; this is the distance between the centre of the keyway and the centre of the square spindle for the handle operation. 

If you read this measurement as 70mm then chances are you have a ferco lock, and your existing handles will be approximately either 205mm or 270mm long.

Here we have the longer 270mm backplate version, which has two fixing points; one fixing screw above the handle and another below the euro profile cut out for the euro cylinder.  The distance between these two screw holes is 240mm (this is known as the fixing centres measurement).

These are universally handed, the handles are free to rotated a 360 degrees endlessly, so you can simply position the handle pointing left or right depending on the handing of your door, before slotting them onto the spindle, meaning you don't have to worry about what is left hand or what is right hand.  These are designed to accommodate both handing.

Supplied with a fresh 8mm square spindle to replace your old one, as well as the necessary fixing screws, everything required to secure the handles functionally onto the door is provided.

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.