Hoppe Atlanta 92 PZ 3-Point Fix uPVC Handles - 245mm (108 + 113mm fixings)
- From Only: £16.54 + VAT
- Brand: HOPPE
With three fixing points on these uPVC door handles, a secure fix is easily achieved and bending / warping of handles is not going to be an issue. Suitable for door thicknesses of up to 72mm, these Atlanta handles from Hoppe are designed for multipoint locks with 92mm PZ centres. This is the distance between the centre of the keyway in the... Read more »
Scroll down for options, pricing & availability!
Ask a Question View Specs BUY NOW
| Ref | Product Name | Stock | Price | QuantityTap in Req. Qty |
Hoppe Atlanta 3-Point Fixing - White
|
 |
£16.54 + VAT
(£19.85 inc VAT) |
||
Hoppe Atlanta 3-Point Fixing - Black
|
|
£15.91 + VAT
(£19.09 inc VAT) |
||
Hoppe Atlanta 3-Point Fixing - Silver
|
|
£17.50 + VAT
(£21.00 inc VAT) |
||
Hoppe Atlanta 3-Point Fixing - Gold
|
|
£15.64 + VAT
(£18.77 inc VAT) |
||
With three fixing points on these uPVC door handles, a secure fix is easily achieved and bending / warping of handles is not going to be an issue.
Suitable for door thicknesses of up to 72mm, these Atlanta handles from Hoppe are designed for multipoint locks with 92mm PZ centres. This is the distance between the centre of the keyway in the euro cylinder, and the centre of the square spindle that allows the handles to operate the follower in the gearbox.
The overall size of these handles is quite typical - measuring in at 245mm x 30mm, with a depth of 8mm. The fixing points (which are where the screws bolt through) sit above the handle, below the handle, and then finally one below the cylinder. The top fixing point sits 91.5mm above the spindle (measured from centre-to-centre), the middle fixing point site 21.5mm below the spindle (measured centre-to-centre), and then the bottom one sits 108.5mm down from the last fixing point (so 130mm from the spindle).
Constructed from aluminium, coated in a range of different finishes including Black, Gold, Silver and White, these should compliment most other door furniture.
These handle sets also conform to EN1906 (26-0130U).
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.
Recently Viewed Products
