Do you want a simple to use, easy to install, alarm system that will notify your mobile phone when it is triggered?
Or perhaps you would like to install an alarm, but are worried about forgetting the code on entry and triggering it yourself by mistake. Whatever the situation the E11 Dual Network Comms Alarm Kit could be the right alarm system for you.
The system features a control panel, a window/door sensor, and a PIR (passive infrared) sensor which is pet friendly, so your dog or cat will not trigger the alarm as long as it is positioned correctly. The control panel could not be simpler to install, you just plug it in to the mains supply! So there is no need to employ an electrician to install it for you. The window/door sensor is fitted via sticky back tape, so no need to screw into your door or window frame.
The E11 can be operated via the touchscreen control panel or via the free smartphone app. The control panel has a built in SIM card holder which accepts a standard size SIM card (not included). The app allows you monitor the control panel remotely and access the ‘listen In’ and ‘two way talk’ functions. It also sends you SMS texts to alert you when the alarm system is triggered, armed/disarmed, tampered with, and when there has been a power failure/recovery.
The E11 functions via dual network telecommunication - this means it is able to use landline phone functionality too, and can notify up to 5 different mobile phone numbers should the alarm be triggered. The control panel allows you to store 5 emergency phone numbers and 5 SMS numbers in total.
The alarm siren can be adjusted in both volume and duration, and you can set the control panel to delay triggering of the alarm on entry or exit - so you do will not have to panic and rush through your door to disarm it. You are also able to fully arm, part arm and disarm the alarm, depending on your requirements at any given time.
The system can be monitored from anywhere in the world via SMS and the app; which features a 150 event log. Another great feature of the alarm is the RFID tag, two of which are supplied with the alarm; which allows you to disarm the alarm by simply holding the tag against the control panel, perfect for those who do not want to have to remember yet another code or go searching for their remote control! The RFID tags can be assigned to an individual, which makes monitoring the system easier as you are able to ID who used their tag to arm or disarm the system and when.
The system can be expanded to support 10 remote controls and 50 wireless sensors in all.
- Control Panel (with back-up battery & internal siren) x 1
- Pet Friendly PIR Motion Sensor x 1
- Door/Window Sensor x 1
- Remote Controls x 2
- RFID Contactless Tags x 2
- All Batteries & Fittings
- Instruction Manual
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.