Luminite 12 volt external PIR for lighting control 40m GX200s are used mainly by the CCTV industry where reliability and versitility are essential. Their uses are lighting control and CCTV applications, namely to command dome cameras to turn to the area where detection has taken place.
Their uses are lighting control and CCTV applications, namely to command dome cameras to turn to the area where detection has taken place.
The GX200 detectors are wired back to a DX control unit using 4 core alarm cable.
TX500 wireless PIR's are used for the same application but do not require any wiring.
Input voltage 12 volts DC
Output via N/C voltage free reed relay contacts
Single or double edge detection with variable sensitivity control
Can be mounted in horizontal or vertical modes and adjusted to various angles
Weather proof UV stabilized case to IP65
Dimensions: H145mm W100mm D155mm
Three different lens patterns available
All lenses have white light filtering
40 metres lens:
TX500/40 Standard 40 metre 1':
Mounting height approximately 2-2.5 metres high.
Average coverage 40 metres * 1'.
TX500/CL Curtain 12 metre 100':
Can be fixed under eaves for 100' coerage against a wall or fixed at 1 metre appoximately (horizontally) which helps avoid detection of small animals.
Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.
|Additional Info pdf||GX200.pdf|
Please note: The data shown includes that of all products listed on the page, including accessories.
Please double-check with us if you're unsure of any individual product specifications.