Luminite 40 x 4.5 metres lens with RS485 connection. The LGWP range of Wireless Passive Infra Red Detectors (PIR) have been designed to meet the newest and most demanding requirements of the CCTV market.
These detectors not only meet but surpass the requirements needed for a BS8418 Remote Monitored System. Inside the PIR is a powerful microprocessor which uses complex algorithms to determine the validity of an activation. With this technology nuisance alarms are significantly reduced whilst maintaining optimum detection.
These detectors have low power MOS relays for the alarm and tamper outputs as well as an RS485 output to enable up to 64 detectors to be connected together with one 4 core cable.
These PIR detectors contain a shock sensor and light sensor to enhance its anti-tamper features which now include physical attack and anti-cloaking. A thermal sensor adjusts the parameters of the PIR in extremes of heat and cold to maintain optimum performance.
LGRS1520:15 x 20 metres
LGRS4004: 40 x 4.5 metres
LGRS12HC: 12 m horizontal curtain
LGRS12VC: 12 m vertical curtain
- Mounting height 2.5 metres.
- Temperature compensation Yes
- Anti Tamper Yes
- Anti Cloak Yes
- Shock sensor Yes
- Enclosure - IP66 3mm thick poly carbonate with stainless steel locking bolts
- Temperature range - 10 deg C +60 deg C
- Dimensions H186mm x W105mm x D90mm
|Additional Info pdf||LGA485_page.pdf|
Please note: The data shown includes that of all products listed on the page, including accessories.
Please double-check with us if you're unsure of any individual product specifications.