40 meter lens, the TX500 WIRELESS DETECTORS are battery operated (PP 3 type) and have the same appearance as their GX200 hard wired low voltage counterparts. A built in light sensor with variable adjuster stops the TX500 from working during daylight hours. If day time operation is required, then simply turn the light sensor adjuster fully anti-clockwise.
The TX500 transmitter is limited to 1mW power output for general use giving about 100M range and 10mW for industrial use giving up to 350M range. The range may be restricted around premises where there are objects, i.e., walls, metal structures, trees etc.
The detector's signal to the RX300, RX400 or special new RX16 Receiver is in the form of secure specially designated codes.
The TX500 has been DTI approved and is licence exempt.
(No licence required).
Durable ABS UV stabilised housing
Three different lens options are available.
40 metres lens:
TX500/40 Standard 40 metre 1':
Mounting height approximately 2-2.5 metres high.
Average coverage 40 metres * 1'.
TX500/CL Curtain 12 metre 100':
Can be fixed under eaves for 100' coerage against a wall or fixed at 1 metre appoximately (horizontally) which helps avoid detection of small animals.
Power Supply: - 9 Volts battery (PP3) type. Use long life type.
Battery Life: - Approximately 12 months depending on situation
Transmitter Power: - 10 m/w with long areal supplied.
Transmitter Frequency: - 173.225 MHz (Crystal Controlled)
Modulation: - Pulse Modulation
Range: - Line-of-sight between aerials without obstruction up to 100 metres when used with the RXB, RX300, RX400 and RX16 standard. 1000 metres plus is achievable when used with the RX16DC receiver.
Site Codes: - 32
Unit Codes - 16 Use these with the RX16 receiver
Dimensions: - H145mm W100mm D155mm
Tested to: - MPT 1344