ASEC Flush Bolt for Wooden Double Doors

If you have a set of double wooden doors, then it's most likely you have these types of manually operated flush fitted shoot bolts on the secondary door, and then a mortice lock on the primary door which secures into the secondary door when it's locked. 

This style of flush bolt is commonly fitted on the leading edge of the slave door, so that the bolts cannot be undone unless the primary door has already been unlocked and opened.  But sometimes you may find them fitted to the inside face of the door too, depending on the setting and the style of door you have. 

These particular flushbolts feature a slimline design, at only 19mm wide, so will fit a wide range of door thicknesses.  In terms of their length, they are available in three standard sizes, 152mm, 203mm, and 254mm, with satin anodised aluminium, satin nickel and traditional polished brass finishes available. 

These are designed to shoot up into the top of the door frame, and down into the bottom of the frame, or into the floor on door sets where there's no lower frame.   We also offer the receiver sockets for these shootbolts, with the automatic cover cap feature to protect from ingress of dust and debris into the hole.

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.