Era 2 Hooks 2 Rollers Split Spindle Multipoint Lock

Meeting the multipoint lock requirements set out by PAS23 & PAS24 this lock has been manufactured by the long-standing manufacturer ERA, who produce a vast range of high quality affordable locking security solutions in the UK.

The two hookbolts on this multipoint lock throw in opposing directions and this bi-directional design works as an anti-jemmy feature, preventing lifting or prying of the door to lift the hooks out of their keeps.  The bottom hook faces down, and the top hook faces up.

In addition to these hooks, and a solid brass deadbolt in the centre gearbox which throws a full 22mm; the lock also features roller cams, which offer additional security to the door, not only by means of providing further locking points, but also because these rollers prevent the lock from leaving 'weak spots' not covered by the hook bolts.

Due to its reversible latch, this lock has no predefined handing; so whether your door is inward or outward opening, with the hinges on the left or the right; this lock can be switched over to suit any handing scenario. 

As with the majority of ERA multipoints, this lock also features a holdback snib on the faceplate, allowing you to keep the latch retracted if you need the door to be free-passage while the door is in constant back-and-fore use etc.

With a 35mm backset and the 92 PZ centres with split spindle functionality; this multipoint follows a highly popular footprint and will retrofit a huge range of existing MP locks.