FIX 2025 Scandinavian Profile Hookbolt Multipoint Door Lock

Designed to work with Scandinavian profile cylinders, the FIX 2025 multipoint lock incorporates two hookbolts and a central latch & deadbolt. 

With a 25mm faceplate, these are designed for use on European doors moreso than what we have usually here in the UK, but these can still be required as replacements as well as new installs for pre-routed doors. 

Quite an important and unique measurement on these is the lock centres (also referred to as PZ centres).  These are quite unique with a 105mm PZ centres measurement, which will be a big give-away that this is likely to be the lock you have if you're looking to replace a lock which uses a Scandinavian cylinder, cited 105mm away from the spindle (measured centre-to-centre).

The backset on these is a fixed 50mm too, which is also fairly uncommon but by no means unheard of.

Getting the right handing!

An important thing to get right on these type locks is the handing.  We have a handing diagram available for you to help, but in principle, it is quite easy to check if you follow the simple guideline as follows:

Whether your door is inward or outward opening, if you stand on the side which means you need to pull the door towards you, and the hinges are on the left (handle on the right), then you have a left-handed door.  Whereas if you do the same and your hinges are on the right (handle on the left), then you have a right handed door.

Our product specifications are given in good faith but can be subject to manufacturer change without notice. Should an attribute be of essense to your purchase, please feel free to contact us first for confirmation.