Fullex XL Crimebeater Twin-Spindle Anti-Lift 2 Hook Multipoint (44mm Faceplate)

This model of Crimebeater XL by Fullex is designed with anti-lift hooks for added protection against lifting or jemmying attacks.  The XL Range of Fullex Crimebeater locks is designed as a long-term, reliable and secure multipoint locking solution; conforming to the requirements of a Secured by Design locking solution, and offering a full-faced locking strip; these 44mm models are made for wooden and composite doors as their 44mm faceplate width is the general width of most standard timber and composite doors, whilst being too large for uPVC doors which would typically require a 16mm faceplate to fit in a euro groove. 

Designed with two hooks (one at the top, one at the bottom) aided by anti-lift bolts, as well as a central latch and deadbolt, these three locking points (2 hooks and central deadbolt) will be engaged by lifting the door handle upward, and then locked into place by operation of the key in a euro profile cylinder these are designed to work with. The anti-lift bolts will then prevent any attempts to mitigate the security of the hooks by lifting or flexing the door. 

Available in 35mm and 45mm backset sizes, these are the most common backset sizes so should suit the vast majority of doors with existing cylinder or keyhole cut-outs.

It is worth noting, that these have twin spindle operation designed to work with off-set lever & pad style handles, situated at 92mm and 62mm PZ measurements.