Winkhaus AV2/AV3 Electronic Upgrade & Repair Parts

If you have a Winkhaus AV2 or Winkhaus AV3 and the time has come where you are considering an electric multipoint lock, there's no need to replace the whole lock, as the beauty of having a Winkhaus AV2 lock is that you can upgrade what you already have to become to AV2-E (also known as the EAV2). 

Everything you need to achieve an upgrade from the standard Winkhaus AV2 or AV3 to an Electronic Motorised AV2E / EV3E is listed here, from the cabling and power supply unit to the motor itself. 

Similarly, if you're lucky enough to already have an electric motorised Winkhaus AV2 lock, but for whatever reason you need to replace some parts which are perhaps growing tired after years of constant use, then these parts can also be purchased for repairing units too.

The Motor fits onto the multipoint lock near to the the central gearbox, and is then able to physically drive the locking points to retract when the trigger is received. 

The Power Supply Unit (PSU) is used to power the lock.  It takes a mains input (100-240v AC) and converts it to a regulated 12v DC supply for the lock operation. Note as of October 2020 there is a new version of the PSU - full details can be seen on this document:  October 2020 PSU Upgrade Info

The Cable & Transition Unit is used to take power and the trigger signal to the lock.  The transition unit is essentially a routed door loop which is designed to be routed into a groove rather than be surface-fixed, allowing for a much more professional and clean install.

Please note, these goods may take up to 5 working days to arrive.  If you require them urgently please contact us so we can make checks and try to expedite the delivery for you.