Legge Bathroom Deadbolt / Deadlatch Mortice Lock

It doesn't get much simpler than this!  Designed by the renowned lock manufacturer Legge; these have been manufactured to be operated by a simple privacy turn and release set and are available in the two typical finishes of polished brass and stainless steel.

Be aware these operate with an 8mm spindle - which is the common industry standard size for this type of bathroom lock, however there are also plenty of 5mm variants out there which are designed for some bathroom locks designed more like a sashlock - where a pair of handles are also required for the latch, with a privacy turn fitted further down. 

So be sure to pick an 8mm spindled privacy turn when ordering your choice of style, if you don't already have one!

The case dimensions are 76mm x 38mm x 14mm with a faceplate of 76mm x 22mm - again all very typical for this type of lock so if you have a bathroom door lock with legge stamped on the face plate which needs replacing, and the dimensions look to be as above, then you should be good to go!