Union 60min Fire-Rated Horizontal Mortice Latch

• SCHÜCO Spare Parts Now Available at LocksOnline!
• How to control entry to your shop via a switch!
• Need a master-key system for a block of flats? Here's the easy way..
• How To Measure Door Locks: The Complete Guide
• How To Pick The Right Lock
• What Are The Benefits Of Keying Alike?
• How To Cope After A Burglary
• Locks In The 21st Century
• Reducing The Risks Of Burglary While You're Away
• 4 Surefire Ways To Ward Off Burglary Easily
• 5 Better Ways to Meet Your Neighbours
• How To Measure Locks
• Build your own Panic Room with LocksOnline
• LocksOnline Top 5 Ways To Increase Home Security
• How Many Keys Do I get with a Keyed Alike Lock?
• Secondary Security, Top Five Must Haves ¡¡
• Is your Door too Thin to take a Mortice Lock ?
• Some Lock History - Ring Keys - Trip to North Wales
• Home security tips for property investors - Guest Article
• Increase the security of your Front Door Security
• Five Tips for Keeping Your Home Secure - Home Security
• Wembley Keys Lost - Should Have Gone to Locksonline
• Where has all the Chubb gone !
• Patio Door Security - Its a must guys on those old Patio Doors - Exclusive
• There is more to security than just locks - Home Security
• The Secret is in the Lock Back Set - Exclusive to LocksOnline
• How does a five lever lock work?
• The Normans had it 'So Sussed' - Perimeter Protection
• Lockguard Security Handle - Era Security Products -- Extract
• Left Hand this, Right Hand that. Whats all this handling about? Door Handing Guide
• What is a five lever mortice deadlock?
• Extract from Quora... What are the best deterrents to potential burglars?
• Why don't you just keep the door open Door Security
• 7 - 6 - 5 - 3 Go -- More Lock Levers the better - Lever Locks
• Quick Tips for Security: Door and Windows Locks
• Protect your Home and Valuables: Spare Keys
• How to identify what lock handing you need - Door Lock Handing
• Identifying your door lock type
• Locks and latches BS8300 and Approved Document 'M' Revised

Hi guys. Thanks for tuning in. My name's Darrel, I'm head of the tech team here at LocksOnline.co.uk and today we've got the Union 26773 Horizontal Mortise Latch.

Now this is . . . When would you want to use this? It's more for if you want to be able to get the handle a little bit further away from the leading edge. That's the leading edge there. So it's a horizontal - we call it in the trade a horizontal latch. And it allows you to get your lever furniture quite a distance away. And this particular one here, the overall case depth there is 127 but they do do one as well which is 151. It's a little bit deeper so 151 millimetres.

Now if you're using furniture with this they don't recommend that you use unsprung furniture. So if you're thinking of putting some knobs or whatever on here, it might be well worth you considering using some sprung-loaded knobs. Which means they can be quite stiff but it might be well worth you playing around with that. They don't necessarily recommend it.

Now you will notice that there's a keyhole there guys. It's not because there is a key in here, it's just that they've used the same plate as the 3 lever Silver Series locking version of this particular type of lock. So it's not really a lock there at all. The follower here, this is what we call a follower. That is 8 millimetres and it'll take an 8 millimetre Spindle. To give you some measurements on this one, this is the 127 millimetre version, and the backset, that's the distance from here to here, is 102 millimetres. The height here is 70 millimetres, That's the height, there, is 70 millimetres. The fore-end height is 121 millimetres and the fore-end width there is 25 millimetres.

Now the one that I have here is in the brass finish but it's also available in a chrome finish or a silver finish as well, should you need to do so. It can also accept, if you noticed here, there's little piercings here and that will allow you to accept what they call bolt-through furniture. So if you've got any furniture like a rose handle or something like that, that is bolt through then these fixings there. I'll get you a quick measurement on that so you will know then, whether or not it's suitable. My centres there and looking there, guys, is round about 34, 35 millimetres. And there's a little bit of tolerance there, as you can see.

So yeah, not much to say about this particular type of, well, it's not a lock really it's just a latch. It comes standard with a keep there. This crazing over it just a cover to keep it all nice and tidy and it comes with some fixing screws as well.

Available from Locksonline.co.uk, so if you want some, feel free to pop on line we'd love to see you as a customer. If you need any more information pop us over an e-mail, pick up the phone or speak to us on our Live Chat. So from me Darrel, many thanks for your time. Chat soon. Take care. Bye-bye.