LocksOnline Imperial Narrow-Stile Euro-Profile Deadlock

Designed for aluminium doors primarily but also suited perfectly to installations into narrow door-stiles, these locks offer a very slim profile design and do not require a deep mortice into the door.   They come in a range of size from 51mm right down to 36mm - yes that's the overall depth of the lock into the door!

While most 'narrow stile' locks come with roughly a 50mm case depth to offer a 35mm backset, these can go as low as 36mm with a 20mm backset.  This is the smallest design we've seen and lends itself superbly to metal doors which often have an extremely narrow door-stile. 

As you will see from the photos, the lock is designed to accept a euro-profile cylinder to operate the deadbolt.  This can of course be any euro cylinder, whether you wish you have a double cylinder to offer key operation from both sides, or perhaps a key & turn cylinder to offer key entry and keyless exit by using the turn snib instead.   Of course this is a deadlock only and therefore offers no latching mechanism to use with handles. 

Please note that these do not come with a keep plate, as most metal door frames would not require one.  But if you do need one then it is available as a purchasable extra under "Don't forget to order".   Two plastic euro escutcheons are however supplied as a means of tidying up around the euro profile cut-out in the door.

Please be aware that the Imperial Locks range is manufactured to order for you specially - so please allow additional time for these to be dispatched!