Narrow Lock for Aluminium & Glass Panel Doors

Ideal for use on aluminium doors or any doors with a wide glass panel in the middle, these locks have only a 50mm case size, allowing for a snug fit in narrow-stile applications where the area in which you have to fit the lock on a door is limited in its width.

So if you're after a lock for a door with a narrow edge to it and are struggling - we know, this is very common!  If you measure the usable width in the door (don't mistake this for the thickness!) you should find even on narrow stiles, you have enough room to accommodate a 50mm lock.  This is the distance from the open edge of the door to the deepest point into the door where the lock will sit.

The latch on these is fully reversible meaning you don't need to worry about what handing arrangement you have, as this will work on both, and can quickly and easily be changed on-site when you come to install it.

The 5-Lever mechanism provides a decent level of security which has also been an issue in the past on such doors, and you can also enjoy the peace of mind offered by the solid brass deadbolt with integral hardened roller pins to protect you against bolt-sawing.

Available in polished-brass and stainless steel finishes.

We can of course key these alike for you here in our workshops, and what's more we're offering this completely free of charge right now!

Locks Measurements

Face Plate Length - 165 mm

Face Plate Fixing Centres - 141 mm

Face Plate Width - 25 mm

Lock Case Thickness 15 mm

Lock Case Height - 108 mm

Lock Case Depth - 50 mm

Lock's Backset - 34 mm

Some doors accept an old narrower face plate lock, you can file the face plate of this lock down if you are trying to fit this lock in an old Aluminium Door.

This Lock Also now has Anti Drill plates and comes with Three Keys as Standard . 

Don't forget about the door handles either! To view our full range of door handles, please click the link: Door Furniture