IFAM Rim Euro Dead Lock

This Great, Handy and cost effective rim bolt are ideal for additional security for your front or back doors. This could be used in hundreds of applications, perhaps a shed door, like a ledge and brace door. Or perhaps the side garage door at your home. 

The lock uses a euro cylinder to throw its bolt. This is ideal if you have keyed-Alike locks throughout your home then this lock can also be part of that group. 

The bolt is a double throw configuration and moves from side to side, so this lock can be used on any handing of the door it is going to be fitted to. 

Comes as standard with fixing screws for wood, Escutcheon and keep for the bolt. 

Euro Cylinders are not supplied as standard but we have a massive range of varying security levels that will work with this lock. 

As this lock sits on the door as opposed to in the door, so you need a cylinder that is long enough to go through the door. 

On the inside, you can have a euro cylinder with a key or a thumb turn. 

These links below can take you to our LocksOnline EPS cylinders that are both thumb turn on the inside or key. 

Key and Key Euro Cylinders: - Click Here

Turn and Key Euro Cylinders: - Click Here

To Measure the cylinder, please follow this guide. 

The inside of the cylinder will be fixed at 30 mm to the centre fixing of the lock, you then need to add 9 mm, then the thickness of the door, then 3 mm projection for the escutcheon. 

An example of using a thumb-turn cylinder on the inside on a 44 mm thick door the size of the cylinder would be. 

30T inside - 9mm + 44mm + 3mm = 56mm outside. 

Another Example on a 38 mm thick door 

30T inside - 9mm + 38 mm + 3mm = 50 mm 

Finally on a 55 mm thick door with a turn on the inside. 

30T inside - 9mm + 55mm + 3mm = 67 mm. (In an instance like this you could use a 66mm or a 70mm cylinder)