68mm PZ Centres uPVC Handles
These upvc door handles all have a 68mm PZ measurement. This is the distance between the centre of the keyway and the centre of the square spindle follower for the handle. In most cases this is a single point with one measurement.
This measurement is commonly referred to as the 'centres' measurement. So if you're looking for a set of door handles with 68mm centres for a uPVC door, then you're in the right place!
LocksOnline Flexi Adjustable PZ uPVC Lever Handles 290mm (260mm Fixings)
Flexi uPVC Lever Door handle designed to fit 75% of Multipoint locks the PZ distance can be varied f..
Prices From: £32.26 + VAT
Fab & Fix uPVC Door Handles for Fullex Locks - 250mm (215mm fixings)
These FAB & FIX handles are designed for use on Fullex door locks. The handles are sprung using ..
Prices From: £38.76 + VAT
Universal Pro-XL Adjustable PZ Lever & Pad Handles
These handles allow for any PZ measurements between 59-96mm and are suitable for straight or offset ..
Prices From: £29.98 + VAT
Hoppe uPVC Handles 68mm PZ for Fullex Locks - 235mm (215mm fixings)
Sprung handles without snib to suit LOCKMASTER, YALE G712 and YALE G2000. The sprung levers are fixe..
Prices From: £34.98 + VAT
Hoppe 68mm PZ uPVC Handles with Snib - 235mm (215mm fixings)
Supplied complete with snib on inner backplate. Handles to suit FULLEX. The sprung levers are fixed ..
Prices From: £34.98 + VAT
Fullex 68 PZ uPVC Lever Handles - 244mm (215mm fixings)
These are the 'snib-less' Fullex handles designed with uPVC doors using Fullex multipoint locks in..
Prices From: £32.89 + VAT
Fullex 68 PZ uPVC Lever Handles with Snib - 244mm (215mm fixings)
These are the snibbed Fullex handles designed with uPVC doors using Fullex multipoint locks in min..
Prices From: £35.71 + VAT
Fullex 68 PZ uPVC Lever & Pad Handles with Snib - 244mm (215mm fixings)
These Fullex handles are designed with uPVC doors using Fullex multipoint locks in mind, however the..
Prices From: £40.97 + VAT
Fullex 68 PZ uPVC Lever & Pad Handles without Snib - 244mm (215mm fixings)
These are the non-locking-snib version of the Fullex 68 series of uPVC lever and pad handles. ..
Prices From: £35.71 + VAT
Hooply 68 PZ Lever Handles with Thumbturn - 278mm (234mm fixings)
These Hooply handle sets are commonly used on steel doors or commercial site steel containers etc.&n..
Prices From: £49.45 + VAT
Lift & Lock Adjustable PZ uPVC Door Handles - 320mm (283mm fixings)
Simply lifting the handle on both variants throws the multi-point bolts and deadlocks the door in a ..
Prices From: £112.97 + VAT
Some of Our Customers..
