The Paxton Easy prox is a battery powered all in one locking solution that is ideal for internal doors. Installation of the Easyprox is simple because it does not require mains power. This model also has a dual operation function that allows a Fob or keycard to be used as well as the keypad entry on the handle itself. This model can hold up to 50 codes, which can range from 4-8 digits.
Additional battery packs can also be purchased, a warning signal for low battery is built into this model so you will always be aware of when it needs to be replaced. Overall the Paxton Easyprox digital keypads are brilliant for medium traffic office or home applications, they provide a moderate to high level of security while maintaining a nice balance when it comes to convenience.
- Battery powered keypad
- Amazingly easy to install
- Anti-shim plunger to prevent forced entry
- Up to 50 codes
- 4 to 8 digit codes
- Card plus PIN or code
- Low battery warning
The brand new Easyprox compact keypad is a complete standalone
battery powered access control system, all in one box.
Easy to fit; Easyprox compact keypad comes with everything you need
for a swift installation.
No external power supply is required, making Easyprox compact keypad
perfect for internal security where mains wiring can prove tricky. Once fitted, Easyprox compact keypad is so simple
to use. To wake up the unit simply press the wakeup
button on the keypad (left) or briefly depress the
handle to power the system.
The red, amber and green LED lights on the reader will start to flash and
the reader is ready to use. This ensures maximum battery life from the
Perfect for use in sports club locker-rooms, storerooms, halls of residence,
classrooms; Easyprox compact keypad allows you to choose the most
appropriate level of security for your customer.
Easyprox compact keypad is an all-in-one battery powered lock and access control system that is ideal for internal doors. Installing the system is easy because it's not wired into a mains power source. This keypad may also be used with proximity tokens to allow token plus code or PIN
Use the template provided to fit the door latch. Cut the square drive to length and slide into the latch. Fit the battery and connect to the unit. The unit will start to beep. Enter your chosen six digit programming code (If using token plus code or PIN then you will also need to present the enrolment card at this stage). Fit the front and rear lock assembly to the door and secure the two parts of the lock together with the fixing screws. Close the door and mark the top and bottom of the latch where it touches the frame. Mark the correct position and fit the strike plate.
If using code or PIN simply enter the number and the door will unlock. If using token plus code or pin, press the power button to "wake up" the unit, present the token then enter the code or PIN.
Paxton Easyprox Compact Related Files:
Installation Guide - Click here