Offset 92/62mm PZ Centres uPVC Handles
These upvc door handles all have an offset 92mm/62mm PZ measurement. This is the distance between the centre of the keyway and the centre of the square spindle follower for the handle. In most cases this is a single point with one measurement, but in this particular case they are designed for multipoints with two separate spindle locations at 92mm and 62mm from the centre of the keyway
This measurement is commonly referred to as the 'centres' measurement. So if you're looking for a set of door handles with offset 92 - 62mm centres for a uPVC door, then you're in the right place!
Contract Multipoint Handles with Variable PZ & Fixings
With fully adjustable fixing-points and PZ centres, these handles will work with 99% of multipoint locks and to top it off, they come in a range of ..
Prices From: £32.12 + VAT
ASEC 92/62 Offset Lever & Pad UPVC Handles - 240mm (211mm fixings)
These handles are to suit ASGARD, ROTO, LOCKMASTER, AVOCET & FAB&FIX Multipoint Locks. Supplied with Spring Cassettes and Spindle. These han..
Prices From: £26.81 + VAT
ASEC 92/62 Offset UPVC Multipoint Door Handles - 240mm (211mm fixings)
These offset handles for multipoint locks are designed to the most common specification, and therefore are widely considered the most universal size..
Prices From: £29.79 + VAT
Fab & Fix Balmoral 92/62 Weather-Resistant Handles with Snib - 243mm (211mm fixings)
The Balmoral range of multipoint lock handles by Fab & Fix boast a very modern, stylish architectural design, built to look outstanding on any d..
Prices From: £19.26 + VAT
Fab & Fix Balmoral 92/62 Weather-Resistant Lever/Pad Handles with Snib - 243mm (211mm fixings)
This is the lever & pad style Balmoral handle set by Fab & Fix. This range of multipoint lock handles boast a very clean, modern archi..
Prices From: £19.26 + VAT
Fab & Fix Offset 92/62 PZ Ashford uPVC Handles - 243mm (211mm fixings)
These offset uPVC door handles are designed for multipoint locks with split-spindle operation at 92mm on the inside and 62mm on the outside. T..
Prices From: £19.89 + VAT
Hoppe Offset 92/62 PZ Retro Style uPVC Lever & Pad Handles - 270mm (240mm fixings)
These reversible 92/62mm PZ uPVC Lever & Pad handles are made to suit ASGARD, LOCKMASTER, AVOCET, ROTO and FAB&FIX. However as long as the m..
Prices From: £36.07 + VAT
Mila Prolinea Offset 92/62 PZ uPVC Lever & Pad Handles - 240mm (211mm fixings)
Both lever and pad Pro-Linea handles have been ergonomically designed for optimum comfort and ease of operation when in use. Their soft lines perfec..
Prices From: £20.40 + VAT
Mila Supa Offset 92/62 PZ Weather Resistant Lever/Pad Handles - 240mm (210mm fixings)
These offset lever & pad handles are part of Mila's "Supa" range of multipoint door handles, which are designed for split-spindle multipoint loc..
Prices From: £57.98 + VAT
Universal Pro-XL Adjustable PZ Lever & Pad Handles
These handles allow for any PZ measurements between 59-96mm and are suitable for straight or offset split-spindle setups, and even offering a fixed ..
Prices From: £36.77 + VAT
ASEC KITE 92/62 Offset High Security PAS24 TS007 Handles - 240mm (211mm fixings)
The ASEC KITE security handle range is designed for front doors with multipoint locks. This is the offset version designed for multipoint lock..
Prices From: £70.18 + VAT
ASEC KITE 92/62 Offset High Security PAS24 TS007 Lever/Pad Handles - 240mm (211mm fixings)
The ASEC KITE handles are part of a security handle range designed for front doors with multipoint locks such as uPVC doors or new composite doors.&..
Prices From: £70.18 + VAT
Some of Our Customers..
